Chord Company C-view HDMI cable

Chord Company
The Chord Company C-view HDMI cable is a cost-effective, high-performance display solution, featuring heavily shielded copper conductors and available in lengths of 0.75m, 1m, 1.5m, 2m, and 3m.

The C-view HDMI cable offers impressive 48Gbps bandwidth, supporting resolutions of up to 8K at 60Hz and 4K at 120Hz. It is fully compatible with Dynamic HDR, HDCP2.3, eARC, 3D, and all HDMI audio formats.

The HDMI performance standard is one of the most rapidly evolving in the industry. HDMI (High Definition Multimedia Interface) cables are unique as they transmit high-frequency signals alongside a 5-volt DC power supply. These multi-purpose interconnects are often longer than most other cables in a system, aside from speaker cables.
Modern homes are filled with devices that generate high-frequency (HF) noise, and cables often act as antennas that pick up this interference. Unfortunately, the longer the cable, the more effective it becomes at collecting unwanted signals. These high-frequency noises can infiltrate unshielded cables and affect the signal earth. To safeguard these delicate signals, all Chord Company HDMI cables are equipped with high-efficiency HF screening to minimise noise pick-up.

The Chord Company C-view HDMI is a certified Ultra High Speed HDMI cable, designed to meet the highest performance standards.
Specifications
Installation

Specifications

Product Type: Cable

Bandwidth: Ultra high-speed 48GBps+

Resolution: 8K/60Hz, 4K/120Hz

Dynamic Range: Dynamic HDR

Operating Distance: up to 3m

Primary Conductors: 28AWG copper

Insulation: Foam-PE

Shielding: Twin AL foil

Cable Jacket: PVC

HDMI connector shell: Gold-plated copper

HDMI connector pins: 19-pin gold-plated copper

Termination: Hand soldering

HDMI connector backshell: PVC

Cable diameter: 7mm

Installation

This HDMI cable has been designed to carry high-quality
picture and sound data. To obtain the best results from this
cable, please follow these instructions:

  • Switch off all equipment before fitting or removing cables.
  • Connect so the direction arrows on the cable point away from the source component.
  • Avoid touching the contact areas of the plug.
  • Route the cable away from power cables.
  • Test for compatibility with the equipment you wish to connect before installing cable in walls, floors etc.
See also