Cary Audio SI-300.2d
High End Streaming DAC
8000
€
€
Solid-State Integrated Amplifier and DAC
Brand: Cary Audio
The SI-300.2d is a Class A/B amplifier boasting 300 watts per channel, complete with analog RCA and XLR inputs and an analog preamplifier section. On the digital front, it employs the same chip found in our top-of-the-line digital products, with a digital circuit topology expertly optimized for digital-to-analog conversion. It also features our exclusive Cary TruBit© Upsampling technology. This unit provides you with four line-level inputs, comprising two balanced XLR and two RCA connections, along with Cinema Bypass, XMOS USB, two coaxial, optical, AES/EBU, and aptX® Bluetooth inputs.
Brand: Cary Audio
The SI-300.2d is a Class A/B amplifier boasting 300 watts per channel, complete with analog RCA and XLR inputs and an analog preamplifier section. On the digital front, it employs the same chip found in our top-of-the-line digital products, with a digital circuit topology expertly optimized for digital-to-analog conversion. It also features our exclusive Cary TruBit© Upsampling technology. This unit provides you with four line-level inputs, comprising two balanced XLR and two RCA connections, along with Cinema Bypass, XMOS USB, two coaxial, optical, AES/EBU, and aptX® Bluetooth inputs.
Buy Now
Just type your contacts
Related Products
What our Clients Say about SI-300
For any sources connected via SPDIF and Bluetooth, you have the option to upsample to various frequencies, including 44.1, 48, 88.2, 96, 176.4, 192, 384, and even 768 kHz. XMOS USB supports sampling rates up to 32-bit/384 kHz, as well as DSD 64 and 128. The robust 300-watt transistor amplifier stage can handle the most demanding musical challenges while retaining the signature warm sound quality associated with Cary Audio. Additionally, a pair of stylish blue arrow indicators not only serve a functional purpose but also lend a unique charm to the amplifier, with the volume control positioned in the center between them.
Beyond the mentioned inputs, the SI-300.2d offers a wide array of connectivity options, including preamplifier/subwoofer output, coaxial and optical digital outputs, an IR port for remote control, trigger output, IR sensor input, Ethernet, and Wi-Fi for seamless control via free iOS and Android apps.
Beyond the mentioned inputs, the SI-300.2d offers a wide array of connectivity options, including preamplifier/subwoofer output, coaxial and optical digital outputs, an IR port for remote control, trigger output, IR sensor input, Ethernet, and Wi-Fi for seamless control via free iOS and Android apps.
Digital Outputs: Coaxial, Toslink operating at Sample Frequency (Fs) from 44.1 kHz to 192 kHz, 16 bit to 24 bit
Digital Input Sample Rates: USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, DSD 128 and DSD 256 BLUETOOTH operating at Sample Frequency (Fs) 44.1 kHz, 16 bit AES/EBU, Coaxial
Master Clock Jitter: Below measurable levels
Digital Sampling Rates (Fs): 44.1 kHz to 768 kHz
Digital Filter: 8x Oversampling Digital Filter
DAC: 2 channel AK4490EQ
Bluetooth: CSR Bluetooth v 4.0 with aptX® low latency audio decoder
Analog Filter: 3rd Order Bessel
Preamplifier Outputs: Single – Ended RCA
Analog Input: Single-Ended RCA x 2 Balanced XLR x 2
Analog Input Impedance: 10 kΩ Unbalanced, 20 kΩ Balanced
Power Amplifier Outputs: 2 x 300W RMS in 8 Ω from 20Hz to 20KHz, 2 x 450W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type: Solid State, Class A/B
Frequency Response: 10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SMPTE-1M): < 0.5%
S/N Ratio: >100dB, “A” Weighted
Protections: Full short circuit, thermal, Ultrasonic, RF Signal muting & current limiter
Control: Trigger output 12.0 VDC x 1, IR control x 1
Communication: Ethernet RJ45 full remote configuration interface Wi-Fi 802.11 b/g/n
Power Input: Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption: 950 Watts (4 ohm load at full output)
Finish: Black powder coated matte chassis with silver or black aluminum faceplate
Dimensions: 152x438x457 mm
Weight: 23,6 kg
Digital Input Sample Rates: USB operating at Sample Frequency (Fs) from 44.1 kHz to 384 kHz, 16 bit to 32 bit, DSD 64, DSD 128 and DSD 256 BLUETOOTH operating at Sample Frequency (Fs) 44.1 kHz, 16 bit AES/EBU, Coaxial
Master Clock Jitter: Below measurable levels
Digital Sampling Rates (Fs): 44.1 kHz to 768 kHz
Digital Filter: 8x Oversampling Digital Filter
DAC: 2 channel AK4490EQ
Bluetooth: CSR Bluetooth v 4.0 with aptX® low latency audio decoder
Analog Filter: 3rd Order Bessel
Preamplifier Outputs: Single – Ended RCA
Analog Input: Single-Ended RCA x 2 Balanced XLR x 2
Analog Input Impedance: 10 kΩ Unbalanced, 20 kΩ Balanced
Power Amplifier Outputs: 2 x 300W RMS in 8 Ω from 20Hz to 20KHz, 2 x 450W RMS in 4 Ω from 20Hz to 20KHz
Circuit Type: Solid State, Class A/B
Frequency Response: 10Hz – 50KHz +/- 0.1dB (at 10db below rated output power)
Distortion (SMPTE-1M): < 0.5%
S/N Ratio: >100dB, “A” Weighted
Protections: Full short circuit, thermal, Ultrasonic, RF Signal muting & current limiter
Control: Trigger output 12.0 VDC x 1, IR control x 1
Communication: Ethernet RJ45 full remote configuration interface Wi-Fi 802.11 b/g/n
Power Input: Configured at factory for either 110-120 or 220-240 VAC, 50-60 Hz
Power Consumption: 950 Watts (4 ohm load at full output)
Finish: Black powder coated matte chassis with silver or black aluminum faceplate
Dimensions: 152x438x457 mm
Weight: 23,6 kg