Chord Electronics Hugo 2

Discover the Next Generation of Audio Performance
In 2014, we disrupted the audio industry with the release of Hugo, a portable DAC and headphone amp that set new standards. Now, we proudly present Hugo 2, a next-generation version that pushes the boundaries of technical and sonic excellence. Harnessing the power of advanced FPGAs and WTA filters (Watts Transient Aligned), Hugo 2 incorporates cutting-edge digital technology to deliver unparalleled performance and fidelity.

Unparalleled Versatility for Home and Mobile Use
Whether you're at home or on the go, Hugo 2 offers unmatched versatility, catering to both headphone enthusiasts and users of conventional audio systems. Its line-level output and comprehensive remote control functionality provide flexibility for various setups, from full-size systems to desktop arrangements. Experience audio excellence wherever you are.

Seamless Connectivity and High-Resolution Playback
Equipped with four digital inputs, including optical, coaxial, and HD USB, Hugo 2 supports high-resolution file playback up to an impressive 768kHz and DSD512 (Octa DSD) through its HD USB input. Additionally, Hugo 2 features extended-range Bluetooth® wireless technology, ensuring seamless connectivity with compatible devices. On the analog front, it boasts two RCA outputs, as well as 3.5mm and 6.35mm headphone outputs, providing versatile connectivity options for your audio setup.

Immerse Yourself in Unrivaled Performance
Elevate your audio experience with Hugo 2, the ultimate portable DAC and headphone amp. Embrace the future of digital sound reproduction and immerse yourself in unrivaled performance wherever you go. Upgrade to Hugo 2 and embark on a journey of sonic excellence.

Materials: Precision-machined aluminium casing with polycarbonate buttons, acrylic signal window, and glass viewing portal. Available in a choice of two colours – natural silver, and satin black
Battery: 2x Rechargeable custom Enix Energies 3.7v 9.6Wh Li-ion (lithium-ion (2600mAh) batteries*
Tap length filter: 49,152 – 10 element Pulse Array design
Playtime: 6 hours (Avg.time)
Charging: Nominal six (6) hours via Micro USB at 1.8amps (fast charge) – Nominal eight (8) hours at 1amp (slow charge)
Connectivity (input): Micro USB (White): 44.1kHz to 768kHz – 16bit to 32bit
Coax via 3.5mm jack (Red): 44.1kHz to 384kHz – 16bit to 32bit
Coax via (same) 3.5mm jack (Dual data mode: Yellow): 44.1kHz to 768kHz – 16bit to 32bit
Optical (Green): 44.1kHz to 96kHz – 16bit to 24bit
Connectivity (input wireless): Bluetooth® (APTX) (Blue): 44.1kHz to 48kHz – 16bit
Connectivity (output): 1x ¼” jack headphone output
1x 3.5mm jack headphone output
1x stereo (L & R) RCA output
PCM support: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 717.6kHz, and 768kHz. 16 – 32bit
DSD support: Native playback supported. DSD64 (Single) to DSD512 (Octa-DSD)
Volume control: Digital, activated in 1dB increments. Last known state saved upon shutdown, with exception of line-level mode
Line-level mode: Activated via dual press of middle ‘Source’ and ‘Crossfeed’ buttons. Line level = 3v via all outputs. Reset by power cycle
Power saving mode: Auto-shutdown after ten minutes of input inactivity

Chipset: Chord Electronics custom coded Xilinx Artix 7 (XC7A15T) FPGA
Tap-length: 49,152
Pulse array: 10 element pulse array design
Frequency response: 20Hz – 20kHz +/- 0.2dB
Output stage: Class A
Output impedance: 0.025Ω
THD: <0.0001% 1kHz 3v RMS 300Ω
THD and noise at 3v RMS: 120dB at 1kHz 300ohms ‘A’ wighted (reference 5.3v)
Noise 2.6 uV ‘A’ weighted: No measurable noise floor modulation
Signal to noise ratio: 126dB ‘A’ Weighted
Channel separation: 135dB at 1kHz 300Ω
Power output @ 1kHz 1% THD: 94mW 300Ω
740mW 32Ω
1050mW 8Ω
Weight: 365g
Dimensions: 2.1cm (H) 10cm (W) 13cm (D)
Boxed Dimensions: 8.5cm (H) 12.2cm (W) 22cm (D)