21 199,99 €
10 in stock
The Fyne Audio Vintage Ten is a masterful blend of traditional craftsmanship and advanced acoustic engineering. Designed by Dr Paul Mills, this stunning vintage loudspeaker represents the perfect harmony between classic aesthetics and modern audio performance. Consequently, it delivers a refined look alongside an immersive, dynamic sound experience.
At the core of these floorstanding speakers lies a bespoke 250mm (10”) IsoFlare driver with a FyneFlute roll surround. Furthermore, this point-source design guarantees exceptionally accurate sound dispersion and a rich, deeply detailed performance that effortlessly fills your listening room.
The innovative BassTrax downward-firing port system ensures smooth, room-filling bass. Moreover, hand-built, Deep Cryogenically Treated crossovers guarantee pristine signal integrity. Presence and HF Energy controls let you fine-tune the output, making these premium speakers perfectly adaptable for any environment.
Experience sound redefined by craftsmanship and true innovation. MGY OU is the official distributor of Fyne Audio in Estonia, Finland, and Spain. Order your Fyne Audio Vintage Ten today and elevate your home listening experience to new heights!
| System Type | 2 way, downwards firing port, with BassTrax Tractrix diffuser |
| Recommended amplifier power (Watt RMS) | 20 – 280 |
| Peak power handling (Watt) | 560 |
| Continuous power handling (Watt RMS) | 140 |
| Sensitivity (2.83 Volt @ 1m) | 94dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 26Hz- 26kHz |
| Drive unit complement | 1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium alloy dome compression tweeter, neodymium magnet system |
| Crossover frequency | 750Hz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated |
| System adjustments | High frequency energy (750Hz – 26kHz) +/- 3dB Presence (2.5kHz – 5.0kHz) +/- 3dB |
| Dimensions – HxWxD | 1040 x 468 x 489mm (40.9 x 18.4 x 19.3″) |
| Net Weight – Each | 54.6 |
| Finishes | Walnut |
| Cabinet Construction | Birch ply with oiled walnut and solid walnut trim, extensive internal bracing |
| S-Trax Position (from cabinet front edge) | 124mm (4.9″) |
| SuperTrax Position (from cabinet front edge) | 100mm (3.9″) |
© 2026 MGY Europe. All rights reserved.
